How to Clean Your Home's Air Filters for a Healthy House
Keep your HVAC system running efficiently with these simple maintenance tips. It's easier than you might imagine to clean an air conditioner filter or furnace filter. Here's exactly how and when it's time to replace them.

How to Clean an HVAC Air Filter
For best results, plan to clean your home's air filters about once a month and replace them about every six months. Be sure to check the manufacturer's instructions to determine the best way to clean your air conditioner or furnace filter, but the steps below will work for most reusable filters.
What You Need
- Screwdriver
- Vacuum with soft brush attachment
- Large bucket or sink
- Hot water
- Distilled white vinegar
- Hose (optional)
Step 1: Turn off the power and locate the filter.
Before you begin, turn off your HVAC unit to prevent unfiltered air from circulating around your home while cleaning. Locate the vent and use a screwdriver to open the unit. Some systems might include multiple vents that each contain a filter, so be sure to clean them all. Remove the filter and inspect it for damage. Replace the filter if necessary; otherwise, continue on to vacuuming.
Step 2: Vacuum the air filter.
Take the filter outside if possible to avoid stirring up dust inside your home. Use a vacuum with a soft brush attachment to remove debris from the filter. Run the brush across the filter to gently loosen stuck-on buildup.
Step 3: Wash the filter with vinegar and water.
If your air filter requires deeper cleaning, fill your sink or a large bucket with a mixture of equal parts hot water and distilled white vinegar. Let the filter soak for approximately one hour, then rinse with clean water. If the filter is too large to fit inside a sink or bucket, use a garden hose to wash it off, letting the water run through the filter in the opposite direction of the airflow. Use a low-pressure setting to avoid damaging the filter.
Step 4: Let dry and replace.
Let the filter air-dry completely before replacing it. This helps prevent mold growth within your HVAC system. Reload the filter inside the unit, ensuring it's facing the right direction for proper airflow. Most filters feature arrow markings that indicate the correct placement; these arrows should typically point toward the furnace in the direction of the airflow. Replace the vents and turn the unit back on.
Post a Comment